Abstract

The range of scene depths that appear focused in an image is known as the depth of field (DOF). Conventional cameras are limited by a fundamental trade-off between depth of field and signal-to-noise ratio (SNR). For a dark scene, the aperture of the lens must be opened up to maintain SNR, which causes the DOF to reduce. Also, today’s cameras have DOFs that correspond to a single slab that is perpendicular to the optical axis. In this paper, we present an imaging system that enables one to control the DOF in new and powerful ways. Our approach is to vary the position and/or orientation of the image detector, during the integration time of a single photograph. Even when the detector motion is very small (tens of microns), a large range of scene depths (several meters) is captured both in and out of focus. Our prototype camera uses a micro-actuator to translate the detec- tor along the optical axis during image integration. Using this device, we demonstrate three applications of flexible DOF. First, we describe extended DOF, where a large depth range is captured with a very wide aperture (low noise) but with nearly depth-independent defocus blur. Ap- plying deconvolution to a captured image gives an image with extended DOF and yet high SNR. Next, we show the capture of images with dis- continuous DOFs. For instance, near and far ob jects can be imaged with sharpness while ob jects in between are severely blurred. Finally, we show that our camera can capture images with tilted DOFs (Scheimpflug imag- ing) without tilting the image detector. We believe flexible DOF imaging can open a new creative dimension in photography and lead to new ca- pabilities in scientific imaging, vision, and graphics.